- Microsoft Windows 10 Pro 10.0.17134 Build 17134
- Intel Core i7-7700HQ
↧
Re: Issue installing Intel Graphics Driver 25.20.100.6326
↧
Re: Intel(R) Dual Band Wireless-AC 8265 keeps dropping connection
Hello janez33,
I am following up with your case and see that we have not heard back from you.
If you need more assistance do not hesitate to reply.
Regards,
David V
Intel Customer Support Technician
Under Contract to Intel Corporation
↧
↧
Re: There are purple lines in my monitor after I installed intel VGA driver
Thanks for your advice.
But when I bought this laptop, This laptop's drivers were for windows 7.
I once formatted my computer, and when I installed Intel driver ( I didnt installed NVIDIA driver) the same problem happens.
I've thought it was a hardware problem...but when i disconnect and reconnect lcd line, it works fine.
↧
Re: 8265 ngw/g2w
May be you could advise what antennas to use with that card?
After I have procured the card without antennas it turned out that it can not connect to anywhere. Though it can detect a nearest wifi point but with very low level of signal.
Moreover, I am just wondering if Intel at all provides LTE solutions, LTE or 3/4G solutions in that form factor, or lte/3/4g solutions with sim card slot.
Thank you
↧
Driver for network controller (Intel WiFi Link 1000)
Hello,
I have just re-installed windows 7 (64bit) in my laptop (HP). Unfortunately it does not recognize the network controller and I can not find the right driver on the internet.
In details (Hardware Ids):
PCI\VEN_8086&DEV_0084&SUBSYS_13158086&REV_00
PCI\VEN_8086&DEV_0084&SUBSYS_13158086
PCI\VEN_8086&DEV_0084&CC_028000
PCI\VEN_8086&DEV_0084&CC_0280
From searching on the Internet I found that the network controler is the "Intel WiFi Link 1000".
Please help me to solve this problem.
Thanks a lot!
↧
↧
NUC5PPYH - (HDMI, VGA, USB) port stop working
Hi,
This product worked perfectly since December 2015 and was connected to a UPS.
The operating system is Windows Professional 8.1.
My NUC is connected to two screens, a Viewsonic analog (VGA) and a Dell digital (HDMI).
HDMI port stopped working during a boot of the NUC, however the VGA port still worked.
I tested the HDMI screen on another machine, it was OK.
I've updated the graphics driver, still no HDMI.
I tested the material with your diagnostic software:
Everything was OK.
In the BIOS, the priority of the screens were on automatic.
So I changed it in screen 1: HDMI and screen 2: VGA.
When you start more no screen didn't work.
After several starts, the keyboard no longer lights and no mouse.
Power LED is stable and the fan in spinning.
I tested these four devices on another machine, all are functioning normally.
I think in maybe a BIOS problem that escalates.
I'm looking for a procedure that allows you to reinstall the BIOS without keyboard or screen?
Then, I only see the hardware problem.
If anyone has a solution...
Thanks in advance to you all.
↧
Re: Driver for network controller (Intel WiFi Link 1000)
What is the complete HP model number of your laptop?
Doc
↧
Re: Internals antennas for Intel Dual Band Wireless-AC 8265 ?
will that likely to work both for BT and WiFI with the 8265?
↧
Intel HD Graphics Control Panel doesn't open
I have a Dell Inspiron 3567 laptop with an Intel HD Graphics 520, when I bought it months ago it was working like a charm, however in the last couple of weeks I cannot open the Intel control panel... it shows that it's initializing and then disappears, i have tried multiple driver re-installations from the Intel website and the Dell website but to no success.
I have included the result from the support assist.
↧
↧
Re: Intel HD 620 Screen Flicker Issue!
IntelCorporation Thanks a lot. But i found the solution.My laptop was installed on MBR. It was supposed to install Windows 10 x64 on GPT & UEFI. I re-installed it on UEFI-GPT and now everything works fine.
↧
Re: Intel Optane Cache full?
Read it. And didnt really found the answer tho..
↧
Re: The last intel-aero-image-1.6.2.iso contains only Lubuntu version, where I can find the ISO with Yocto image?
were you able to get the image working with the DD method? I am interested in a similar issue?
Thanks,
-Matt
↧
Dual Band AC 3165 - poor speed only on this laptop
I have a host of devices connected wireless that run download speeds between 65-100 mbps. However, this laptop cannot break beyond 21. I've made sure all updates were appropriately made and followed a few only trouble shooters to look for items bogging this pc down or device manager/network adapter modifications. Nothing is working. Any help is appreciated, thanks!
↧
↧
Upcoming new platform integrations for RealSense SDK 2.0
Hi everyone,
Notification of new platforms being integrated into RealSense SDK 2.0 have been added to the upcoming features list in the SDK release notes.
Unreal Engine
OpenNi2
Open3D
↧
Re: faceshift compatibility with d435
Thanks for your reply, MartyG. The problem is nobody can find SR300 anymore, so I'm asking Intel - actually anybody would be a great help, to perform some tests with the newer models, but using the older SDK and DepthCam.
I understand there are security issues, but Faceshift users are trapped now. It was quite an investment of time and money... and then Apple happens... then supported cameras slowly disappear!
↧
Re: How to prevent win 10 to reinstall bad graphic driver?
That is a difficult question, as there are so many 7th, 8th, and 9th gen processors from which to choose.
And, if you are building your own system, the processor choices are dictated by the motherboard you select. Little to none of your existing system will be salvageable. And, the big question is what you want to use for graphics - the Intel processor graphics, or using an add-on graphics card.
If you are looking to purchase an already configured system, there are a number of manufacturers from which to choose, and systems might be easier to choose.
So, I did not give you a direct answer. To me, it be comes a choice of a motherboard, or a pre-configured system.
Doc
↧
Re: faceshift compatibility with d435
The SR300 is still available in third-party form. It was manufactured by Creative on behalf of Intel, and Creative's own BlasterX Senz3D product is virtually identical to the official SR300. It uses the same Intel drivers too.
Razer also make their own SR300-compatible called the Razer Stargazer. This also uses Intel's official SR300 drivers.
It is unknown how long these products will continue to be manufactured, but they are available for the time being.
A couple of other programs were also negatively affected by the change from R1 to R2, including the 2016 SDK's compatibility with Unreal Engine (though Intel are soon releasing a new Unreal Engine wrapper for RealSense SDK 2.0).
The 400 Series cameras unfortunately would not work with the 2016 Windows SDKs, as they have no support written into them for the 400 Series cameras or the ZR300 model.
Given the number of SDK 2.0 wrappers for different platforms (MATLAB, LAbVIEW, Unity, etc), I would not rule out the possibility of someone being able to write a wrapper in SDK 2.0 to communicate with Faceshift. It would likely be a Faceshift fan who is a member of the RealSense community who does it, though.
↧
↧
How to iterate over pointcloud for color data
I am attempting to access the color values of pixels from the RGB sensor with the goal of storing a few frames as "snapshots" in a bitmap format. Because there is no native .getColor() method available in the SDK like there is for depth, my reading has lead me to create a PCL pointcloud from aligned frames from which to extract RGB values point by point.
I do not understand how to iterate over the pointcloud so that a bitmap in (x,y) could be "colored in" with matching values from cloud->points[i] . How should I approach this next step?
Also, if there is an easier way to access pixel (x,y) from the RGB sensor, please let me know!
↧
Re: How to iterate over pointcloud for color data
It is probably a good idea to show exactly how I am creating the pointcloud:
pcl::PointCloud<pcl::PointXYZRGB> *points_to_pcl(const rs2::points& points, const rs2::video_frame& color){
pcl::PointCloud<pcl::PointXYZRGB> *cloud(new pcl::PointCloud<pcl::PointXYZRGB>);
auto sp = points.get_profile().as<rs2::video_stream_profile>();
cloud->width = sp.width();
cloud->height = sp.height();
cloud->is_dense = false;
cloud->points.resize(points.size());
auto tex_coords = points.get_texture_coordinates();
auto vertices = points.get_vertices();
for (int i = 0; i < points.size(); ++i)
{
cloud->points[i].x = vertices[i].x;
cloud->points[i].y = vertices[i].y;
cloud->points[i].z = vertices[i].z;
std::tuple<uint8_t, uint8_t, uint8_t> current_color;
current_color = get_texcolor(color, tex_coords[i]);
cloud->points[i].r = std::get<0>(current_color);
cloud->points[i].g = std::get<1>(current_color);
cloud->points[i].b = std::get<2>(current_color);
}
return cloud;
}
This is adapted from Yonatan-Sade's solution...
https://github.com/IntelRealSense/librealsense/issues/1601#issuecomment-387512731
↧
Re: faceshift compatibility with d435
MartyG, no words can live up to the size of this "Thank You!" you deserve.
↧